The car ignition switch is one of the most important components of an automobile, liable for starting the engine and providing power to particular regions of the car, such as the ignition, engine, and electronic accessories.
Nonetheless, the starter switch can occasionally malfunction, making your car unworkable and leaving you helpless. In such situations, it may be essential to bypass ignition switch to get your automobile functioning again.
While this procedure can be daunting for those who don’t understand mechanics, it is fairly simple and easy and can be completed with a few basic tools.
In today’s blog, we will discuss how to bypass the ignition switch to start the car and will a bad ignition switch drains a battery. So, ensure to read auto repair tips till the end.
What Are Bad Ignition Switch Symptoms?
Below are the signs of a bad ignition switch; if you notice any of these signs, hire an expert to fix them.
-
Car Starts, And Unexpectedly Stalls
Sometimes, a defective key ignition switch will permit your car to start. However, it may only give temporary power to the ignition system and fuel pump, ultimately causing your car to stall.
Ignition switch issues may also inhibit you from restarting your vehicle owing to worn ignition connections, which have become sensitive to trembling and heat.
-
Quiet Starter Motor
A quiet starter motor also points to a bad ignition switch, but if you come across that, put your transmission in neutral and check if there is an issue with the neutral safety switch.
If you notice any clicking noises coming from the motor, you may have problems other than an ignition switch issue. Can a bad ignition switch cause transmission problems? No, it does not cause transmission issues.
-
The engine Won’t Start
A faulty ignition switch won’t provide power to the system, starter motor, and other engine controls, stopping the engine from starting.
Remember, other mechanical and electrical issues, like defective starter solenoids and a dead battery, may also cause engine problems.
How To Bypass The Ignition Switch To Start A Car?
Here are the two most effective methods to bypass the ignition switch to start the vehicle.
-
Jumpstarting
Jumpstarting is beneficial when your vehicle battery has a low charge. When you select jump-starting as an alternate technique, ignition switch problems can also be resolved.
To use this method, you require two things a car (battery) and a portable jumper. Before getting started, ensure both cars are switched off. Then, find each automobile’s ignition coil and battery.
Then, you need to attach the battery’s positive terminal to the coil’s positive side. Disconnect the ignition switch from the solenoid and attach it to where it connects. After this procedure, starting solenoid will directly pass electricity to your vehicle dashboard.
-
Hotwiring
Hotwiring your automobile commences with finding the needed wires to start your car. You can discover these wires underneath the steering wheel. After eliminating a plastic case-like covering underneath the steering wheel, you will locate wires.
In this procedure, pay special attention to three wires: the starter connector, battery, and ignition. Now, strip the battery and ignition wires and link them.
You must strip the starter wire and connect it to the battery wire to start the engine. After completing this process, your vehicle should start working.
Conclusion
The ignition switch is the car’s most used part that should forever be in excellent condition to prevent car starting problems. Like other car components, it needs service frequently.
If you witness bad ignition switch symptoms, hire a qualified mechanic to fix a vehicle. Follow Fast Cash For Cars for more vehicle repair tips.